OFNA 1/8 Nitro Hyper SS 2.4GHz RTR White 14356

$187.00

Add to Cart:


This is the OFNA Hyper SS Ready-to-Run 1/8 Off Road Buggy. The Hyper SS is packed with updated features, like front kingpin style steering for improved chassis clearance, captured upper turnbuckles to minimize upper arm flex, and an arching upper arm that adds strength. Big bore shocks keep the car stable, whether in the air or deep in the terrain, while the JL.28 powerplant will tear into the dirt and push the Hyper SS around easily with speed and grunt. The pre-painted body looks great as its blasting through the dirt, and will allow the Hyper SS to make a mark that you and your friends will not forget.

In Depth Features:
JL.28 Nitro Engine: Big block power propels the buggy, with powerful low end torque and impressive speed. A super sized cooling head keeps the engine cool, run after run, and a dual stage air filter protects your engine from harmful particles that could lead to damage.
C-Hub Suspension: King-pin front suspension gives clearance for the front arms to prevent chassis scrub, the steering is also set to have a large amount of active steering. These components are strong and light.
Polished Pipe: The Hyper polished tuned pipe has an impressive look and delivers a good powerband for the JL.28 engine.
Big Bore Shocks: 17mm Shocks are hard coated and black anodized for an intimidating look, while the 4mm shock shafts and large volume shock bodies provide solid performance.
Molded Radio Tray: A composite radio tray holds the throttle and steering servos, battery and receiver. Maintenance is done with less work as the components can be easily removed by simply pulling out the radio tray. A silicone switch cover keeps the grit out and you can mount a transponder on the box when you are racing.
Mud & Stone Guards: The stone and mud guards keep dirt out and the body tightly wraps with the guards and the rear mud guards vent the mess away from the suspension.
Features at a Glance:
High performance JL.28 engine
Radical front suspension design for optimum steering
Big bore shocks with threaded bodies
Orange anodized shock towers, hinge pin holders and top plate
Large capacity fuel tank and fuel filter
Orange countersunk aluminum chassis
Enclosed receiver and battery box
3 Oil filled differentials
Front & rear fiber brakes
Adjustable turnbuckles for camber and steering
One piece molded radio tray
Updated C-Hub suspension
Rubber sealed bearings
Dual stage air filter
Polished aluminum Hyper pipe
Front and rear sway bars
Buggy race tires and dish wheels
Hi-impact nylon wing
Specifications:
Chassis:
Length: 460mm (18.1")
Width: 300mm (11.8")
Front Track: 305mm (12")
Rear Track: 308mm (12.1")
Weight: 3538g (7.81lbs)
Height: 140mm (5.5")
Wheel Diameter: 114mm (4.49")
Engine:
Stroke: 16.8mm
RPM: 38,000
Horse Power: 2.7
Weight: 330g
Glow Plug: Standard Long Hot Plug (OFN51010 recommended)
Needed to Complete:
(8) AA Batteries for transmitter
Rechargeable 6.0V receiver battery & charger
Glow Ignitor
Wheel nut wrench
Fuel Bottle
15-30% Nitro Fuel